Visioli, Antonio.

Control of Integral Processes with Dead Time [electronic resource] / by Antonio Visioli, Qingchang Zhong. - London : Springer London : Imprint: Springer, 2011. - XXV, 250 p. online resource. - Advances in Industrial Control, 1430-9491 . - Advances in Industrial Control, .

Introduction -- Part I: PID Control Schemes -- PID Tuning Methods -- Stability Region under PI and PID Control -- Performance Assessment -- Plug&Control -- Part II: Two-degree of Freedom Control Schemes -- Noncausal Feedforward Control -- Schemes with an Inner Loop -- Smith-predictor-based Control Schemes -- Smith-principle-based PID-type Controller -- Disturbance-observer-based Control Scheme -- Quantitative Analysis -- Practical Issues.

Integral processes with dead time are frequently encountered in the process industry; typical examples include supply chains, level control and batch distillation columns. Special attention must be paid to their control because they lack asymptotic stability (they are not self-regulating) and because of their delays. As a result, many techniques have been devised to cope with these hurdles both in the context of single-degree-of-freedom (proportional-integral-differential (PID)) and two-degree-of-freedom control schemes. Control of Integral Processes with Dead Time provides a unified and coherent review of the various approaches devised for the control of integral processes, addressing the problem from different standpoints. In particular, the book treats the following topics: • how to tune a PID controller and assess its performance; • how to design a two-degree-of-freedom control scheme in order to deal with both the set-point following and load disturbance rejection tasks; • how to modify the basic Smith predictor control scheme in order to cope with the presence of an integrator in the process; and • how to address the presence of large process dead times. The methods are presented sequentially, highlighting the evolution of their rationale and implementation and thus clearly characterising them from both academic and industrial perspectives. Control of Integral Processes with Dead Time will serve academic researchers in systems with dead time both as a reference and stimulus for new ideas for further work and will help industry-based control and process engineers to solve their control problems using the most suitable technique and achieving the best cost:benefit ratio.


10.1007/978-0-85729-070-0 doi

Chemical engineering.
Industrial engineering.
Control, Robotics, Mechatronics.
Industrial Chemistry/Chemical Engineering.
Industrial and Production Engineering.

TJ210.2-211.495 TJ163.12


Implemented and Maintained by Biju Patnaik Central Library.
For any Suggestions/Query Contact to library or Email: OR Ph:91+6612462103
Website/OPAC best viewed in Mozilla Browser in 1366X768 Resolution.

Powered by Koha