Proulx, Tom.

Optical Measurements, Modeling, and Metrology, Volume 5 Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics / [electronic resource] : edited by Tom Proulx. - New York, NY : Springer New York : Imprint: Springer, 2011. - X, 422 p. online resource. - Conference Proceedings of the Society for Experimental Mechanics Series, 2191-5644 . - Conference Proceedings of the Society for Experimental Mechanics Series, .

3D Structures of Alloys and Nanoparticles Observed by Electron Tomography (40 minute presentation) -- Damage Characterization in Dual-phase Steels Using X-ray Tomography -- In-situ Synchrotron-radiation Computed Laminography Observation of Ductile Fracture -- Understanding the Mechanical Behaviour of a High Manganese TWIP Steel by the Means of in Situ 3D X ray Tomography -- Mechanical Properties of Monofilament Entangled Materials -- Caracterisation of Mechanical Properties of Cellular Ceramic Materials Using X-ray Computed Tomography -- Multiaxial Stress State Assessed by 3D X-ray Tomography on Semi-crystalline -- Polymers -- Effect of Porosity on the Fatigue Life of a Cast al Alloy -- Fatigue Mechanisms of Brazed Al-Mn Alloys Used in Heat Exchangers -- Three Dimensional Confocal Microscopy Study of Boundaries between Colloidal Crystals -- Scale Independent Fracture Mechanics -- Keynote Presentation (40 minutes) -- Consistent Embedding: A Theoretical Framework for Multiscale Modeling -- Analysis of Crystal Rotation by Taylor Theory -- Keynote Presentation (40 minutes) -- Numerical Solution of the Walgraef-aifantis Model for Simulation of Dislocation Dynamics in Materials Subjected to Cyclic Loading -- Photoelastic Determination of Boundary Condition for Finite Element Analysis -- Discussion on Hybrid Approach to Determination of Cell Elastic Properties -- Mesh Refinement for Inverse Problems With Finite Element Models -- Assessment of Inverse Procedures for the Identification of Hyperelastic Material Parameters -- Digital Image Correlation Through a Rigid Borescope -- Scale Independent Approach to Strength Physics and Optical Interferometry -- Keynote Presentation (40 minutes) -- Optical Techniques That Measure Displacements: A Review of the Basic Principles -- Studying Phase Transformations in a Shape Memory Alloy With Full-field Measurement Techniques -- Correlation between Mechanical Strength and Surface Conditions of Laser Assisted Machined Silicon Nitride -- Analysis of Speckle Photographs by Subtracting Phase Functions of Digital Fourier Transforms -- Measurement of Residual Stresses in Diamond Coated Substrates Utilizing Coherent Light Projection Moiré Interferometry -- Automatic Acquisition and Processing of Large Sets of Holographic Measurements in Medical Research -- Adaptative Reconstruction Distance in a Lensless Digital Holographic Otoscope -- 3D Shape Measurements With High-speed Fringe Projection and Temporal Phase Unwrapping -- Measuring Local Mechanical Properties of Membranes Applying Coherent Light Projection Moiré Interferometry -- Experimental Analysis of Foam Sandwich Panels With Projection Moiré -- Panoramic Stereo DIC-based Strain Measurement on Submerged Objects -- Advances in the Measurement of Surfaces Properties Utilizing Illumination at Angles Beyond Total Reflection -- Filters with Noise/Phase Jump Detection Scheme for Image Reconstruction -- An Instantaneous Phase Shifting ESPI System for Dynamic Deformation Measurement -- Development of Linear LED Device for Shape Measurement by Light Source Stepping Method -- Calibration Method for Strain Measurement Using Multiple Cameras in Digital Holography -- Performance Assessment of Strain Measurement With an Ultra High Speed Camera -- Rigid Body Correction Using 3D Digital Photogrammetry for Rotating Structures -- Development of Sampling Moire Camera for Landslide Prediction by Small Displacement Measurement -- Energy Dissipation in Impact Absorber -- Mechanics Behind 4D Interferometric Measurement of Biofilm Mediated Tooth Decay -- Validating Road Profile Reconstruction Methodology Using ANN Simulation on -- Experimental Data -- Electro-optical Property of Sol-gel-derived PLZT7/30/70 Thin Films -- Decoupling six Effective Parameters of Anisotropic Optical Materials Using Stokes Polarimetry -- Measurement of Creep Deformation in Stainless Steel Welded Joints -- Thermal Deformation Measurement in Thermoelectric Coolers by ESPI and DIC Method -- Structural Health Monitoring Using Digital Speckle Photography -- Determining the Strain Distribution in Bonded and Bolted/Bonded Composite Butt Joints Using the Digital Image Correlation Technique and Finite Element Methods -- Improved Spectral Approach for Continuous Displacement Measurements From Digital Images -- Experimental Testing (2D DIC) and FE Modelling of T-stub Model.

Optical Measurements, Modeling and, Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

9781461402282

10.1007/978-1-4614-0228-2 doi


Engineering.
Engineering mathematics.
Surfaces (Physics).
Engineering.
Appl.Mathematics/Computational Methods of Engineering.
Measurement Science and Instrumentation.
Characterization and Evaluation of Materials.

TA329-348 TA640-643

519

Implemented and Maintained by Biju Patnaik Central Library.
For any Suggestions/Query Contact to library or Email: library@nitrkl.ac.in OR bpcl-cir@nitrkl.ac.in. Ph:91+6612462103
Website/OPAC best viewed in Mozilla Browser in 1366X768 Resolution.

Powered by Koha